How to connect the converter?
Watch the video
Voltage converter for car (alsoknown as an inverter) is a very useful device that makes it possible to convert 12V from the vehicle's on-board network to 220V. Thanks to it, it is possible to operate various household devices away from stationary outlets. For example, using an inverter, you can easily charge your laptop with a complete charger, heat the water with an electric kettle, run a drill or any other equipment.
If you want to learn how to make an inverter for a car with your own hands, then read the article How to make a converter.
How to connect the transducer and install it?
First you need to decide on the outputpower converter. If you have enough 300-500 watts, then you can do with a cheap inverter. In those cases where it is necessary to power powerful equipment that consumes up to 1000 watts, you will need a more expensive and powerful device.
Connection and installation of the converter:
- First, fix the transducer block inside the car body, place it best in the trunk;
- Now install the standard outlets inside the car's interior and connect them using a copper wire (cross section of at least 1.5 mm2) with the output of the converter;
- After this, you must lay a copper wire (section not less than 3 mm2), connected to the input of the converter, under the lining inside the cabin, right up to the battery;
- The wires from the inverter are connected to the battery terminals with the correct polarity.