Assembly of the sliding-door wardrobe: instructions and diagram. How to properly assemble a wardrobe?
The wardrobe is the leader's step onThe domestic market among furniture of various configurations. Thanks to him free space is spent sparingly, it fits perfectly even in a small room. Despite the fact that the wardrobes are compact in size, they are quite roomy. In addition, they are multifunctional and have a long service life when properly assembled.
Process of preparation
In order to make it easier to navigatethe question of how to collect furniture, complete with the elements always includes an instruction. The layout of the cabinet-compartment includes information about the stages of work, the name and the number of parts and elements. When buying a cabinet, it is also necessary to check the quality of each component part: laths, fasteners. You need to make sure that there are no different kinds of defects on the furniture - blisters, cracks, chips. When transporting the furniture set, it is recommended to observe precautions, for example, poorly fixed furniture can fall and break.
Tools for building a wardrobe
To ensure that the furniture has served its owner as much as possiblelonger, it must be properly completed. Any assemblage of a case-compartment (the instruction and the scheme will help us with it) will not do without use of some tools. Here are the main ones:
- Building level and measuring tape.
- Drill or perforator.
- A hammer.
- Self-tapping screws and dowels.
Select the installation location. Markup
First of all, you need to decide whereto place the purchased furniture. Before you will be assembling the cabinet (corner compartment), it is important to take into account all the nuances and details of placement. When planning the installation of furniture in the corner of the room, keep in mind that it is from the angle that the total length is measured. To determine this value, the size of the mezzanine is removed. Next, draw a vertical line, which will be the display of the boundaries of the future cabinet. In order for the line to be even, you need to make a few labels, and then connect them.
For a long service life of furniture requiredquality assembly of the doors of the wardrobe. Instructions for this work are needed. Next, you need to decide where the bar separating the items for things with horizontal shelves and the place where the clothes hangers will be placed will be located. To determine these areas, you need to measure the perimeter of the future ceiling of the cabinet and measure the necessary distance from the edge of the structure. On two vertically arranged lines, the height of the shelves, the size of the edge of the structure and the vertical stand are marked.
Mounting of fastenings for a case-compartment
Modern furniture manufacturers suggest,that an action plan is needed for such a difficult business as assembling a wardrobe. The instruction is enclosed with each piece of furniture. Only after all the step-by-step steps are understood with understanding, it is possible to start installing the fasteners for the sliding door wardrobe.
To the pre-drawn lines, attach fasteners and mark places for future holes, where later it will be necessary to score the dowels.
Fastening of the elements of the cabinet
Since the cabinet is assembled independently, without the involvement of professionals, it is necessary that before the eyes there is always a scheme of assembling the cabinet-compartment in order to avoid possible errors.
The vertical rack is fixed with screwsto the fasteners. Before setting the mezzanine, draw a line with a pencil in the place where it will be located. On this line holes are drilled, self-tapping screws and dowels are hammered in them, then a fastening is mounted on them. Any assembly of a cabinet-compartment, the instruction of which describes in great detail the whole process, implies the installation of mezzanines. It is fixed and fixed with screws. Then you can proceed to install the side panel. To do this, you need to measure the distance from the floor to the ceiling as accurately as possible. The sidewall is fitted to the size of the main structure and securely fastened. On it and a vertical rack marks are made, in the marked places 2 fastenings are mounted. After that, the shelves are fixed and fixed with screws.
Since it is correct to assemble the closet can far awaynot everyone, this process must be approached with all seriousness and responsibility. Where there will be a wardrobe or a place where there will be hangers, you need to hang a pipe. She will be clinging to her hangers with clothes. The pipe is cut to a certain size and installed on the fasteners that were made in advance. The next step is the markup. The points of attachment to the surface of the wall are marked with a pencil. In each false panel, a hole is drilled into which the plug is clogged. Then the panels are fixed with screws in the marked places.
Assembling the doors of the wardrobe
When the basic design of the cabinet is fixed,you can proceed to such an immediate process as assembling the doors of a sliding cabinet, the installation instructions of which are step-by-step painted. It is necessary to adjust the length of the guides to the appropriate size. The slats are fixed to the false panels on the floor and ceiling with the help of screws. Each model of the cabinet has the principle of a sliding door system, but furniture from different manufacturers has its own individual characteristics. It is desirable to choose a system that does not require the installation of special equipment. You can order doors in a furniture factory, then you will not have to cut the material further and adjust the sheets to fit. How to assemble the doors of the closet yourself? Algorithm of actions:
- Secure the rails to the finished door. Their rollers are undesirable to tighten very tightly and tightly, since they must move freely.
- Alternately insert the door into the lower and upper guides.
- In order for the doors to open silently, after adjusting them for the angle and height of the slope on the sides of the sliding cloth, you can paste the pile.
Next, check the operation of the door. It should be easy to close and open, there should not be any strange and creaking sounds, the fittings must be securely fixed.
Kinds of sliding-door wardrobes
Before choosing a wardrobe, you needdetermine his model. Some prefer the built-in view, others prefer full-size view. The first model is a design that is built into free space. The only drawback of this type is the impossibility of moving. The second type is a custom-made chiffoner. And the assembling of the cabinet-compartment (the instruction must necessarily be attached) is carried out either by the buyers themselves or by specialists.
In conclusion, we can conclude that if inthere is a niche in the room, this place is the best place to build a built-in closet. After all, save space, it will save your money.